- Optimized for dual coil atomizers with SERIAL battery configuration 8.4 V
- For unregulated devices - mechs
- For experienced users
Quad Mech SERIES 4 mm Alien coils intended for SERIAL battery configuration 8.4 V. are made for atomizers with not so wide post holes with 4 mm inner diameter.
We made Serial Coils with Quad cores, because why not try the limit of possibility.
Because of very thin wire used the Coils are soft upon instalation but they harden when heated with dry burn. Instal them with care not to deform them.
Disclaimer: Serial Coils are big coils with lots of mass. It means they cool down later as coils for a parallel battery configuration and in my opinion they are not as good in overal peformance. But I know the Serial Mechs are beautifull and fun and you want to play with them. I get it. :) On planet Earth the cool down time is not in favor of Serial Mechs and you get planty of vapor with regular Coils. But you're the boss and you'we been varned. :)
Quad Mech SERIES 4 mm
2 coils in the package
Core 4 X 31 gauge (0.23 mm) Nichrome N80
Wrap 38 gauge (0.1 mm) Nichrome N80
7 wraps on 4 mm ID
Resistance:
- Single coil 0.748 Ω
- Dual coil 0.374 Ω
These coils are intended to use with devices with SERIES configuration. DO NOT use batteries with a damaged wrap. Use only good quality Samsung, Sony, LG, Molicel batteries with at least 20 amps discharge ratio. Always obey Ohm's Law. SAFETY FIRST!
